Surplus electronic parts : https://epartsconnect.com
Stock and Crypto AI Prediction : https://stocksignalslive.com

A generic Chinese HVAC tool for swapping leaky schrader valve cores in a charged system, or using the side port to pull vacuum or charge them without the valve-core restricting flow.
#shorts

12 thoughts on “Very cool tool”
  1. Avataaar/Circle Created with python_avatars Red Eye says:

    These are fantastic, the old company I use to work for I did alot of HVAC and this was included in the gauge set I had in my van, I unfortunately had to give it back when I left

  2. Avataaar/Circle Created with python_avatars Samuel Clubb says:

    Honeywell make one of these for changing the core in their thermostatic radiator valves without draining the heating system.

  3. Avataaar/Circle Created with python_avatars Mark B says:

    Yep, seen those used by refrigeration techs, definitely a cool tool.

  4. Avataaar/Circle Created with python_avatars Durok Subaka says:

    Been around since the early 90’s I think C&D valve made them first JB owns them now

  5. Avataaar/Circle Created with python_avatars Joel Robert Justiawan says:

    Want? Extremely yess!!!
    Needed? Not right now but there is possibility.

  6. Avataaar/Circle Created with python_avatars JennyJansen says:

    I have seen a mechanic do that with regular tools. Air is cheap.

  7. Avataaar/Circle Created with python_avatars jTempVids says:

    When we had a new outdoor A/C unit installed on our house, the fill port on the A/C was leaking from the factory. The HVAC technician had to use that tool to replace the leaking schrader valve. The only problem was he couldn't get the valve out. It was stuck. So finally he just removed the plunger and just opened and closed the valve as quick as possible on the tool. It shot the schrader valve out a good 20 meters and hit a vehicle parked in the yard at the time. He installed a new schrader valve and the problem was fixed.

  8. Avataaar/Circle Created with python_avatars ChubbyCheeks says:

    Wow

  9. Avataaar/Circle Created with python_avatars Girthy 10 incher says:

    If you have a quality cap a leaky valve core isnt an issue, the cap will seal any leaks, Schrader valves are not leak proof

  10. Avataaar/Circle Created with python_avatars 3maisons says:

    And we use this complicated tool because the compressed gas in the tube is extremely rare and precious — when you fill your tires with helium.

  11. Avataaar/Circle Created with python_avatars Fulop Lehel says:

    This is a nice tool, I used it this suumer, on some hvac equipment. It worked well for me. Nice invention.

  12. Avataaar/Circle Created with python_avatars Phil S says:

    Seeing as we have Schrader valves on our A/C systems, this is a tool I MUST buy. Heading to "The Usual Suppliers" right now!! 🙂

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.